- Home
- Power, UPS & Chargers
- CyberPower PFC Sinewave 1350VA/810W Tower UPS with USB-A and USB-C (CP1350EPFCLCD) CyberPower PFC Sinewave 1350VA/810W Tower UPS with USB-A and USB-C (CP1350EPFCLCD)
CyberPower PFC Sinewave 1350VA/810W Tower UPS with USB-A and USB-C (CP1350EPFCLCD)
- Description
- Specifications
- FAQs
- Reviews
UPS
Clean pure sine wave power for mid to high-end PCs, servers and networking hardware
The CyberPower PFC Sinewave 1350VA/810W works with conventional and active PFC power supplies and uses GreenPower UPS technology.

A tiltable colour LCD reports status and events, six protected outlets cover your gear, and built-in USB-A and USB-C ports deliver up to 30W total for charging devices. The battery is user-replaceable.
Highlights
Key features
Six protected outlets
All with battery backup and surge protection.
USB-A and USB-C charging
30W total, with USB-C up to 15V/2A.
Tiltable colour LCD
Shows power, battery, load, fault and event information.
The specs that matter
What these specs mean for you
Capacity: 1350VA / 810W
VA and watts describe how much equipment the UPS can run. Add up the watts of everything you will plug in and leave some headroom.
Transfer time: 8 ms typical (max 12 ms at normal sensitivity)
How quickly the UPS switches to battery when the power drops. A few milliseconds is fast enough for computers and network gear.
Runtime: 9.6 min at half load, 2.1 min at full load
How long the battery keeps equipment running in a blackout. It falls as the load rises, so the time to save work and shut down is what matters.
Ideal for
Home offices, creators and small businesses protecting PCs, servers and networking hardware.
| Power & Protection | |
|---|---|
| Capacity | 1350VA / 810W |
| UPS topology | Line-interactive |
| Output waveform | Pure sine wave |
| Active PFC compatible | Yes |
| Outlets | 6, all battery and surge protected |
| Voltage regulation | Single boost |
| Transfer time | 8 ms typical (max 12 ms at normal sensitivity) |
| USB charging | 1x USB-A (5V/2.4A max), 1x USB-C (5V/2.5A, 9V/2A, 15V/2A max), 30W total |
| Surge suppression | 405 joules |
| Network protection | RJ45 (1-in / 1-out) |
| Battery | |
| Runtime | 9.6 min at half load, 2.1 min at full load |
| Recharge time | 8 hours typical (90% recovery after full-load discharge) |
| Battery | Sealed lead-acid, 12V/7Ah x2, user-replaceable |
| Replacement battery pack | RBP0146 |
| Management & Physical | |
| Display | Tiltable colour LCD |
| Ports | 1x USB (HID compliant), dry-contact serial |
| Software | PowerPanel Business |
| Remote monitoring | SNMP/HTTP with optional RMCARD205 |
| Form factor | Tower |
| Dimensions | 100 × 280 × 355 mm |
| Weight | 10 kg |
| Certifications | CE, RoHS |
| General | |
| Manufacturer part number | CP1350EPFCLCD |
| Warranty | 2-year CyberPower advance replacement warranty |
| In the box | |
| Contents | CyberPower CP1350EPFCLCD UPS USB cable |
| Warranty | |
| Warranty | 2-year CyberPower advance replacement warranty |
How long will it run during a power outage?
The rated runtime is 9.6 minutes at half load and 2.1 minutes at full load. Actual runtime depends on the equipment you connect.
Can I replace the battery myself?
Yes. The battery is user-replaceable, and the replacement pack is RBP0146.
Can it charge my phone or laptop?
It has one USB-A and one USB-C charging port with 30W total output. USB-C supports up to 15V/2A.